With a fully extended boom length of 115.5 feet at a radius of 26.3 feet, the crane can lift loads of ... Construction Lifting & Concrete Placement. Tadano AC 4.110-1, AC 5.120-1 All Terrain Cranes.

Whatever the moniker, LMI technology gives the crane operator a continuous read-out of the boom length, boom angle, and the radius – and usually an actual load weight. Ken Martinek, crane specialist ...

The Crane Operator’s Manual – CMAA Specification 79 supports lifting operations that use overhead cranes for material handling throughout North America. Available in English and Spanish, the 32-page ...

Crane Planner 2.0 combines highly detailed, ... In addition, typical measurements such as lifting height or radius can be activated and user-specific measurements ...

Ballast to mast foot radius is 22.8 or 32.1 metres. The main mast can be configured to 61.2, 72.7, 84.2, 95.6, 107.0, 118.5, 129.9 or 141.3 m. "The outstanding feature of the AL.SK190 is its large ...

The LTR 1150 is PCE’s first telescopic crawler crane, joining a fleet of two Liebherr LR 1160.1 lattice jib crawler cranes. PCE, founded in 1969 by Vince Wetton, began investing in its own cranes in ...

But it did, allowing one of the world's largest cranes to lift the truss 60 ft, rotate it on a 165-ft swing radius and set it down onto preconstructed abutments with an inch of tolerance, recalls ...

Taking advice from heavy-lift experts, we plotted out how much each crane can pick up at approximately 61 m (200 ft) away from the crane's center of rotation—also known as the lifting radius ...

Building an 802-foot-tall skyscraper in San Francisco required a crane with very high lifting capacities covering a wide working radius and fast line speeds, while at the same time being as space ...

Liebherr expands heavy-lift ship crane portfolio with new 800-tons crane. Image courtesy Liebherr The LS 800 E has all-electric drives and offers a working radius of 39m.

The lift has to be very smooth and precise because any shift in load or radius can have a high impact. For cranes, the two most important variables are weight and radius — this defines the ...

The cranes themselves must be correctly supported and all outriggers and other lifting aids should be deployed before lifting commences. Cranes and other side booms when used shall be positioned so ...